Filter
Top Products
English 22
SETUP
INSTALLING THE CARD
Be sure to format a newly purchased card or one that was used in another
device before using it in your camera (pages 124 and 134). If an unformatted
card is used, the card itself may become unusable.
4 Clos
e
1 Push the battery cover lock to
the right to release it.
3 Insert the card with the label
side facing up.
Battery cover lock
2Open
Battery cover
5Push the battery cover lock to
the left to lock it.
The colored label is visible when
the battery cover lock is not
completely closed. Be sure to
close the lock completely so that
the colored label is not visible.
Colored label
2Pull it out
1Push the card in
<When removing the card...>
h To remove the card, press it in,
and then release. The card will
protrude slightly, and you can
then pull it out.