Sanyo VPC-E10 Digital Camera User Manual


 
English 68
1 Touch sensor menu (page 69)
2 Resolution menu/video size
menu (page 70)
3 Compression rate menu
(single-shot/sequential shots
mode only) (page 73)
4 Focus mode menu (page 74)
5 Light-measuring mode menu
(page 76)
6 ISO sensitivity menu
(page 77)
7 White balance menu (page 79)
8 Exposure correction menu
(page 80)
h Change the brightness of the
image.
9 Date imprint menu (page 81)
h Imprint the capture date on still
images.
iWhen you specify multiple functions that cannot be simultaneously
enabled, the function which was last set becomes the active setting, and
the other settings accordingly change automatically.
#: Set the shutter button
touch sensor to ON.
$: Set the shutter button
touch sensor to OFF.
<Single-shot/sequential shots
mode>
k:
Shoot at 3648
×
2736 pixels
(single-shot mode only)
N:
Shoot at 3648
×
2056 pixels
(16:9 aspect ratio)
D:
Shoot at 2816
×
2112 pixels
z:
Shoot at 2288
×
1712 pixels
t:
Shoot at 1600
×
1200 pixels
[: Shoot at 640 × 480 pixels
<Video clip recording mode>
d: Shoot at 640 × 480 pixels
5: Shoot at 320 × 240 pixels
<: Make an audio recording
(page 71)
j: For shooting at low
compression
0: For shooting at normal
(moderate) compression
B: 9-point focus mode
C: Spot focus mode
p: The focus follows the
focus-locked subject.
X: Multi-section light-
measuring
W: Center-weighted light-
measuring
Y: Spot light-measuring
t: Sets the ISO sensitivity
automatically (ISO50 to
200).
*:ISO50
u: ISO100
v: ISO200
w: ISO400
6: ISO800
-: ISO1600
S: ISO2500
>: The camera will determine
the setting automatically.
r : For photography in fair
weather (sunny) conditions
o: In overcast conditions
p: Under fluorescent lighting
q: Under incandescent
lighting
^: For setting the most
accurate white balance