Filter
Top Products
177 English
TROUBLESHOOTING
Viewing
images
The colors of
the images
captured
indoors are not
correct.
This is due to
ambient
lighting.
Capture the
image using the
forced flash mode.
61
The white
balance setting
is incorrect.
Set the white
balance setting
correctly.
84
A part of the
image is
missing.
The strap or a
finger was
blocking the
lens.
Hold the camera
correctly, and make
sure the lens is not
obstructed.
38
“No image” is
shown.
There is no
data in the
installed card.
Play back after
capturing images
or making audio
recordings.
—
During audio
playback, there
is no sound.
The playback volume
setting on the camera
is too low.
Adjust the
play-
back
volume.
94
Connecting
to a TV
There is no
color in the
image.
The image is
distorted.
The TV output
setting is not
correct.
Select the cor-
rect TV
output
setting.
134
Both the dedicated
S-AV interface
cable and the
dedicated
component cable
are connected.
Make the correct
connection.
154
No image or
sound.
The camera is
not correctly
connected to the
TV.
Follow the
instructions to
make the con-
nection correctly.
151
The TV input is
not set
correctly.
Set the input
on the TV to
“VIDEO”.
Problem Cause Action
Reference
page