Filter
Top Products
English 14
For Windows Me/Windows 2000 users
Mounting your camera
1 Set the camera to the card reader mode (page 11).
h If a message appears on the computer monitor instructing you to load
the Windows CD-ROM, follow the instructions and install the driver.
h The camera is recognized as a drive, and [XACTI HD1A (E:)] appears
in the [My Computer] window.
* The drive name (E:) may be different on your computer.
h The card is recognized (mounted) as a disk.
h Double-click on the [XACTI HD1A (E:)] icon in [My Computer], and
you can process the contents of the card installed in your camera
exactly like you would the data in the other computer drives.
Dismounting the camera
CAUTION
iTo disconnect your camera, be sure to follow the procedure below. Failure
to follow this procedure may cause faulty operation of your computer or
loss of card data.
1 Left-click on [Unplug or Eject Hardware] in the task tray.
h A list appears showing the devices connected to the computer’s USB
connector.
2 Left-click on the camera drive (E:).
* The drive name (E:) may be different on your computer.
h The [Safe to Remove Hardware] dialog box will open.
3 Click on the [OK] button.
h You can now disconnect the camera.