Filter
Top Products
EN-24
Recording Shots into Multiple Image Layout
The Album Shot mode enables you to easily record images and combine three shots
into a single image.
1. Slide the mode switch to [ ].
2. Press the button, and select the [Function] menu with the af button.
3. Select [Capture Md.] with the OZc / ed buttons, and press the button.
4. Select [Album Shot] with the OZc / ed buttons, and press the button.
5. Press the button.
6. Press the shutter button to capture the first image.
7. Press the shutter button again to capture the second and third images.
The camera returns to normal preview display by pressing the ed button. Press
the ed button again to switch back to album shot preview display.
This shot can only be recorded if there are 3 shots recorded in each of the
available frames.
Recording Shots using Face Detection Technology
Face Detection Technology can identify and focus on the human faces in the image.
This advanced function simultaneously detects up to 10 human faces regardless of their
position in the scene.
1. Slide the mode switch to [ ].
2. Press the button, and select [ ] icon with the se / af buttons. Press the
button.
With Face Detection turned on, the camera identifies main face (white frame)
and subsidiary faces (gray frames).
If the camera cannot detect and track any faces, there will be no frame shown on
the screen.
3. Press the shutter button halfway down to lock
the focus.
When the main face is in focus, the white
frame simultaneously turns green.
Otherwise, it turns red.
4. Press the shutter button down fully to capture
your image.
Subjects that are not suitable with this function:
a. A person is wearing glasses, sunglasses, or face is covered with hat or hair.
b. A person turns sideways.
Focus lock