Filter
Top Products
EN-37
Setup Menu
Set your camera’s operating environment.
1. Slide the mode switch to [ ] or [ ]; or press the
button.
2. Press the button, and select the [Setup] menu with the af button.
3. Select the desired option item with the OOc / ed buttons, and press the
button to enter its respective menu.
4. Select the desired setting with the OOc / ed buttons, and press the button.
5. To exit from the menu, press the button.
Date/Time
Refer to the section in this manual titled “Setting the Date and Time” (page 17) for
further details.
Language
Refer to the section in this manual titled “Choosing the Language” (page 18) for further
details.
Auto Off
If no operation is performed for a specific period of time, the power to the camera is
automatically turned off. This feature is useful for reducing battery usage.
* 1 Min. / 2 Min. / 3 Min. / Off
Beep
This sets whether or not to mute the camera sound each time you press the camera's
buttons.
* On / Off
Display
This sets the image information display state.
* Default / All / Off
Video Out
This sets your camera to match the system of the equipment that you are going to
connect to the camera.
* PAL / NTSC