Filter
Top Products
Preparing
ENGLISH
21
Battery Level Display
✤ The battery level display indicates the amount of power remaining in the battery pack.
1. Fully charged
2. 10~40% consumed
3. 40~60% consumed
4. 60~80% consumed (prepare a charged one)
5. 80~95% consumed (change the battery)
6. 100% consumed
(camcorder will turn off soon, change the battery as soon as possible)
✤ Please refer to the table on page 20 for approximate continuous recording time.
✤ The recording time is affected by environmental temperature and conditions.
The recording time becomes very short in a cold environment.
The continuous recording time in the operating instructions is measured under the condition of using a fully charged
battery pack at 25°C(77°F). As the environmental temperature and conditions may be different when you actually use the
camcorder, the remaining battery time may not be the same as the approximate continuous recording times given in these
instructions.
Tips for Battery Identification.
A charge mark is provided on the battery pack to help you remember whether it has been charged
or not.
Two colors are provided (red and black) you may choose which one indicates charged and which
indicates discharged.
Note
: The charge mark does not affect the battery’s charge status.
1
2
3
4
5
6
00732M SCL901 SEA (20-45) 12/26/03 10:45 AM Page 21