Filter
Top Products
ENGLISH
28
Basic Recording
Playing back a tape on the LCD
✤ You can monitor the playback picture on the LCD Screen.
✤ Make sure that the battery pack is in place.
1. Hold down the tab of the power switch and push the switch to PLAYER mode.
2. Insert the tape you have just recorded.
3. Open the LCD Screen and make sure that STOP is displayed on the OSD.
Adjust the angle of the LCD Screen and set the brightness or the color if necessary.
4. Press the (REW) button to rewind the tape to the beginning.
■ To stop REWIND, press the (STOP) button.
■ Camcorder stops automatically after rewinding.
5. Press the (PLAY/STILL) button to start playback.
■ You can see the video you recorded on the LCD.
■ To stop the PLAYBACK operation, press the (STOP) button.
Note:
You can also monitor the picture on a TV screen, after connecting the camcorder to a TV or VCR. (see page 53)
1
PLAYER
2
PUSH
3
STOP
4
REW
STOP
5
PLAY/
STILL
STOP
00732M SCL901 SEA (20-45) 12/26/03 10:45 AM Page 28