Sharp VL-NZ50U Camcorder User Manual


 
57
Appendix
Appendix
Demonstration Mode
You can watch a brief demonstration of the
special camcorder features in Demo mode.
If the demonstration appears on the screen
when you turn on the camcorder for the first
time, cancel the Demo mode to use your
camcorder.
Note:
• The demonstration is only displayed in English.
OFF
ON
OTHERS
BEEP
TIME CODE
TC OUT
DEMO
LANGUAGE
RETURN
MODE
ON
D EMO MODE
Canceling Demo Mode
1 During the demonstration, press the
MENU button to pause the demonstra-
tion.
2 Press l or m on the operation button
to select I, then press the SET button.
3 Press l or m to select “DEMO MODE”,
then press the SET button.
4 Press l or m to select “OFF”, then
press the SET button.
5 Press the MENU button to turn off the
menu screen.
Note:
• The demonstration will pause if you press the
MENU button. If you leave it for 60 seconds, or
turn the power off temporarily and then set the
Power switch to CAMERA, the demonstration will
begin again.
OFF
D EMO MOD E
Watching the Demonstration
1 Remove the Mini DV cassette from the
camcorder (see page 10).
2 In CAMERA mode, press the MENU
button until the menu screen appears.
3 Press l or m on the operation button
to select I, then press the SET button.
4 Press l or m to select “DEMO MODE”,
then press the SET button.
5 Press l or m to select “ON”, then press
the SET button.
6 Set the Power switch to OFF, then hold
down the Lock button and set the Power
switch to CAMERA.
The demonstration begins.
OFF
ON
OTHERS
BEEP
TIME CODE
TC OUT
DEMO
LANGUAGE
RETURN
MODE
VL-NZ50U-053-060 02.2.12, 5:24 PM57