Sharp VL-Z1U Camcorder User Manual


 
16
Preparation
Preparation
Closing the viewfinder
Push in the viewfinder completely.
Notes:
Do not use excessive force when moving
the viewfinder.
Do not pick up the camcorder by the
viewfinder.
The viewfinder automatically turns off when
the LCD monitor is opened. If the vertical
rotation of the monitor is 180° when in
Camera mode, however, the viewfinder is on
and the subject is displayed both in the
viewfinder and on the monitor (see page 36).
You can adjust the settings on the MENU
screen through the viewfinder by using the
Operation button (see page 27 for use of the
Operation button).
Be sure to close the viewfinder after use.
Adjusting the diopter
Adjust the diopter according to your
eyesight when the picture in the viewfinder
or the characters on the on-screen display
is not clear.
1 Pull out the viewfinder completely.
2 Hold down the Lock button and set
the Power switch to v.
3 While looking through the viewfinder,
turn the diopter adjustment dial until
the indicators in the viewfinder are
clearly visible.
Note:
For cleaning the viewfinder, see page 68.
Diopter adjustment dial