Filter
Top Products
43
Useful Features
Playback Functions
with the Remote
Control
(Not supplied)
You can use the following playback
functions with the remote control (not
supplied), if you purchase it as a specified
part by contacting the nearest SHARP
service center or your dealer. (See page 42
for use of the remote control.)
Reverse Playback
The reverse playback function allows you to
play back images in reverse.
During playback, press the j
button.
Slow
The slow function allows you to play back
images in slow motion.
During playback, press the SLOW
button (f).
Then, select the tape direction using
the advance/reverse buttons (j or
h).
To return to normal playback, press the
PLAY button (t).
Note:
• To protect the tape, the camcorder automati-
cally returns to normal playback if it is left in
Slow mode for more than 10 minutes.
Frame Advance
The frame advance function allows you to
play back still images frame by frame.
1 During playback, press the
PAUSE/STILL button (g) to
pause playback.
2 Press the h (or j)
button.
• Each time you press the
button, the picture
advances one frame
forward (or backward).
To return to normal playback, press the
PLAY button (t).
Notes:
• The sound is off during reverse, slow, and
frame advance playback.
• If you use the slow or frame advance function
with the tape recorded in LP mode, the
picture may advance several frames at a
time.
• The reverse frame advance moves about 30
frames.
To return to normal playback, press the
PLAY button (t).
Note:
• The camcorder automatically returns to
normal playback if it is left in reverse
playback for more than 30 minutes.
Advance/reverse
buttons
PAUSE/STILL
button
SLOW button