Filter
Top Products
Useful Features
37
Fade In and Fade Out
Available mode:
Tape Camera
The fade function allows you to gradually
bring the image and sound in or out at the
beginning or end of a scene for creating
scene transitions. This is especially effective
in creating a dramatic change in scenery.
4 Press the DISPLAY/MODE SET
button until on-screen indicators
appear.
5 Press the Record Start/Stop button to
begin recording.
• The picture turns white, and the
image and sound fade in.
6 Press the Record Start/Stop button at
the point where you wish to stop
recording.
• The image and sound fade out as the
picture gradually turns white. The
camcorder then returns to Recording
Standby mode.
To cancel Fade mode
Select “OFF” in step 3 above.
To use Fade Out only
1 During camera recording in Tape
Camera mode, press the DISPLAY/
MODE SET button until the mode
screen appears.
2 Perform steps 2 and 3 in “Using”.
3 Press the Record Start/Stop button at
the point where you wish to stop
recording.
Note:
• Fade mode automatically cancels after Fade
Out.
Using
1 In Tape Camera mode, press the
DISPLAY/MODE SET button until the
mode screen appears.
2 Press l or m on the Operation
button to select “FADE”, then press
the centre of the Operation button.
3 Press l or m to select “ON”, then
press the centre of the Operation
button.
FADE
OFF
BLC GAIN/
AUTO FOCUS
FOCUS
REC
REC
30min
min
AUTO
FADE IN
REC
30min
AUTO
FADE IN
REC
2727min
min
AUTO
FADE OUTOUT
min
AUTO
FADE
REC
Fade in
Fade out
Operation button
DISPLAY/MODE
SET button
Record Start/Stop
button
VL-Z400H-037-047 04.3.23, 8:42 AM37