Filter
Top Products
Advanced Features
Playback
Advanced Features
66
Editing with the DV
Terminal (IEEE1394)
Available mode:
Tape Playback
This camcorder can be used as a digital
video editor. A DV cable transfers all
dubbing signals including video and audio
directly to the camcorder.
Preparation
Connect the camcorder to video equipment
with a DV terminal using a commercially
available DV cable.
:
To Record to Video Equip-
ment
See “Cutting Unwanted Sequences” on
page 65 using the video equipment as the
recording source.
Notes:
• Make sure that the video equipment to which
you are recording can input dubbing signals
via the DV terminal.
• When displaying the playback picture on the
PC, you may find black bands around the
image. This is caused by the differences of
the image display sizes.
•“i.LINK” refers to the IEEE1394-1995 industry
specification and extensions thereof. The z
logo is used for products compliant with the
i.LINK standard. This “i.LINK” mark is a
trademark of Sony Corporation.
Note:
• See page 2 for how to open the terminal
cover.
To DV
terminal
To DV
terminal
DV cable (commercially available)
Video equipment
with DV terminal
(e.g. DV camcorder)
The arrow shows the signal flow.
VL-Z400H-064-069 04.3.23, 8:44 AM66