Filter
Top Products
Appendix
Appendix
98
Demonstration Mode
Available modes:
Tape Camera, Card Camera
You can watch a brief demonstration of the
special camcorder features in Demo mode.
If the demonstration appears on the screen
when you turn on the camcorder for the first
time, cancel the Demo mode to use your
camcorder.
Watching
• The example screens shown are for Tape
Camera mode.
1 Remove the Mini DV cassette from
the camcorder (see page 10).
2 In Tape Camera mode or Card
Camera mode, press the MENU
button to display the menu screen.
3 Press l or m on the Operation
button to select Z, then press the
centre of the Operation button.
4 Press l or m to select “DEMO
MODE”, then press the centre of the
Operation button.
5 Press l or m to select “ON”, then
press the centre of the Operation
button.
6 Set the Power switch to OFF, then
hold down the Lock button and set
the Power switch to v.
• The demonstration begins.
Cancelling
1 During the demonstration, press the
centre of the Operation button to
pause the demonstration.
2 Perform step 2 to 4 in “Watching”,
then select “OFF” in step 5.
Notes:
• The demonstration will pause if you press the
centre of the Operation button. If you leave it
for 60 seconds, or turn the power off
temporarily and then set the Power switch to
v, the demonstration will begin again.
• Demonstration mode does not work in self
recording with reversed grip.
OTHERS 1
BEEP
REMOTE
DEFAULT
RETURN
OFF
ON
DEMO MODE
ON
DEMO MOD E
VL-Z500E-E-096-104 04.2.17, 9:24 AM98