Filter
Top Products
the QCD. This simply activates the QCD when in the "1" position. I usually leave it
on. Others complain that the dial gets moved accidentally, so they keep it turned off.
3.4 Function Button
On the camera back near the left side is the Function button. Repeated presses of the
button cycle you through several different options. There is no fixed starting point in
this cycle so the first press may be anywhere in the cycle of options. I’ll start with
the ISO selector. Press the Function button repeatedly until you get there, and then
turn the Main Dial until you get the film speed you want. Press the shutter button half
way to confirm your selection. Unless you have custom function #3 set to "1", this
EI (Exposure Index) or "rated" ISO will only apply to the roll of film you have in the
camera. As soon as you put another film canister into the camera it will select the
film speed that is imbedded into the DX coding. Obviously custom function #3 is for
when you want to "rate" a film and have several rolls of it you want to burn right away.
Wedding photographers frequently do this with some professional films.
Another press of the Function button will get you to Auto Exposure Bracketing
(AEB). By turning the Main Dial you will see the single exposure point, on the expo-
sure scale, in the LCD, turn into three points. As you turn the dial further the exposure
points will separate more. Each click of the dial separates the exposure points an addi-
tional 1/2 exposure stop away from each other. If you want AEB to be three separate
exposures, 1 stop apart, set the scale so the outside points are at -1 and +1 with the
center point in the center of the exposure graph. Press the shutter half way to confirm
your selection. The next three shots will be; 1) at the selected exposure, 2) one stop
under exposed, and then 3) one stop over exposed. You can do this same thing without
AEB by using Auto Exposure Compensation for each exposure, but AEB provides an
easy way to do this for several different shots in a row. Maybe even the whole roll. If
you want more or less than a 3 shot AEB, you would have to do it with AEC or just use
Manual mode.
The next press of the Function button brings the camera to Red Eye Reduction
mode. Use the Main Dial to select "0" for off, or "1" for on. Press the shutter button
half way down to confirm your selection. This only works with the built-in flash in the
up position. You probably won’t need it with an external flash as it sits farther away
from the lens axis. This mode provides you with several seconds of a bright white light
to help reduce the iris of the subjects eyes. Just press the shutter button half way down
for three seconds and then take the picture. This will annoy your subjects to no end,
and in my opinion this is a nearly worthless feature, but other cameras have them, so
Canon had to do it too.
The next press of the Function button brings the camera to the beep control fea-
ture. Use the Main Dial to select "0" for off, or "1" for on. Press the shutter button
half way down to confirm your selection. I don’t normally like cameras beeping at me,
but I leave this one on because it confirms when the focus has locked on, and it’s quiet
enough not to be a real bother.
The next press of the Function button brings the camera to the Multi-Exposure
mode. Use the Main Dial to select the number of exposures you will want on this frame
of film. Nine is the maximum. Press the shutter button half way down to confirm your
13