Filter
Top Products
Operation
The operation of the camera and the selection of individual functions are
mainly performed by means of the two menu dials and the five rocker
switches (also see the illustrations on the fold-out pages C and D).
On/Off Switch
•
To activate the Sinarm, press this switch forward to “ON” for approxi-
mately two seconds. A successful activation of the camera is con-
firmed with an acoustic signal.
•
To switch the camera off, press the switch towards the back to “OFF”.
An acoustic signal will resound (when the feature “Acoustic Signal” is
activated).
Shutter Release Button
The shutter release button has two steps:
•
When the release button is pressed all the way down (second step) an
exposure is made.
•
By touching the release button (first step), you exit the respective cam-
era menu (Switches 2, 3 or 4), which you may have activated, and the
displayed setting will be confirmed.
Every time the shutter release button is actuated, an acoustic signal will
resound (when the function “Acoustic Signal” is activated).
11
When using a Sinarback with fiber optics interface and a Power-
Optics Master cable, the wide J14 plug has to be plugged into the
socket of the adapter plate.
11. Plug the flash sync cable in the X sync socket on the front of the
Sinarm and on your flashlight unit.When using a Sinarback with fiber
optics interface and a PowerOptics Master cable, this cable can also
be plugged in the respective socket of the PCI Board 2, too.
12. Start the Macintosh computer.
13. Switch on the Sinar m by pushing the on/off switch forwards for about
two seconds (confirmed with an acoustic signal).
14. When using a Sinarback with fiber optics interface, the option “Back
Power Supply” must be activated in order to supply the Sinarback
with electrical power.
15. Start now the Sinar CaptureShop™ software.
➤ Your camera is now ready to work.
10