Filter
Top Products
2. The Configure Network Adapters screen will appear. In the drop-down menu
at the top of the screen, select the appropriate option for your network.
• The Internet: Select to connect from home and/or via an ISP (e.g., to
browse the Internet).
• Work: Select to connect to a private network, (e.g., a work or proxy network.
If you are connecting to a proxy or secure network, refer to your
Pocket PC documentation for configuration information.
3. If you DO NOT need to enter IP addresses, (i.e., your network uses
DHCP), tap ok. You are now ready to proceed to STEP 4 to connect to a
LAN and insert the card.
4. If you DO need to enter IP addresses, tap Socket 10-100 Driver.
Do not select NE2000 Compatible Ethernet Driver, because the
Rugged CF 10/100 Card is not NE2000 compatible.
5. Enter your network settings. In the IP Address screen, select Use
specific IP address to enter the necessary IP addresses. Tap on the Name
Servers tab to enter DNS and WINS addresses.
CHAPTER 2: INSTALLATION 11