Filter
Top Products
59
Using the shooting functions
Shooting menu For details on the operation 1 page 43
The flash strobes two or more times before
shooting to reduce the red-eye phenomenon when
using the flash.
• To avoid blurring of images, hold the camera firmly until the shutter is released. It usually takes a second
after you press the shutter button. Be also sure not to allow the subject to move during this period.
• Red-eye reduction may not produce the desired effects. It depends on individual differences and
conditions, such as distance to the subject, or if the subject looked away from the pre-strobe. In such a
case, you can correct the red-eye using [Retouch] in the viewing menu after shooting (page 66).
• When the Face Detection function is not used, the flash will not strobe to reduce red-eye phenomenon
even when [Auto] is selected.
Analyzes the scene to be shot, and improves the image quality by automatic correction.
• DRO is an abbreviation for “Dynamic Range Optimizer”, a function that automatically optimizes the
difference between light and dark parts of an image.
• Depending on shooting conditions, it may not be possible to obtain correction effects.
• Note the following points when [DRO plus] is set.
– Time is required for image processing.
– You can select only from [ISO AUTO], [ISO 80] to [ISO 400].
– When Burst/bracket shooting is selected, [DRO plus] is canceled and [DRO standard] is set.
Red Eye Reduction: Setting the Red Eye Reduction function
(Auto)
When the Face Detection function is activated, the flash
strobes automatically to reduce the red-eye phenomenon.
(On)
The flash always strobes to reduce the red-eye phenomenon.
(Off)
Does not use Red Eye Reduction.
DRO: Optimizing the brightness and contrast
(Off)
Does not adjust.
(DRO standard)
The camera automatically adjusts the brightness and contrast
of the entire scene.
(DRO plus)
The camera automatically adjusts brightness and contrast of
the images area-by-area.