Filter
Top Products
COLOR CCD CAMERA User’s Manual
41
COLOR CCD CAMERA User’s Manual
40
Press the SET button in the EXIT menu to save the current settings and exit the SET menu.
EXIT
LANGUAGE : You can select the menu language according to your requirements.
RESET : Resets the camera settings to the factory defaults.
RETURN : Select this to save the SPECIAL menu settings and return to the SPECIAL
menu.
- CAM ID : Determines the camera's identification number (between 0 and 25).
- BAUD RATE : You can select 2400/4800/9600/19200/38400/57600 bps.
- UART MODE : You can select NONE, EVEN or ODD for the parity bits.
- RET PKT : Determines whether to send a command back to the controller device
when a communication control command is sent to the camera.
- DISP CAM ID : Display camera title on top left corner of the screen.
DIS (Digital Image Stabilizer) :
This function mitigates any picture movement due to external factors such as wind.
How to Use the Camera
- MASK COLOR : Determine area color. You can select Gray, Green, Red, Blue, Black,
White.
- TRANSP : Determine the transparency of selected area as controlling number from 0 to 3.
- RETURN : Select this to save the PRIVACY menu settings and return to the SPECIAL
menu.
•
The chance of resolution decrease is existed because DIS function uses the digital zoom.
•
DIS doesn’t operate when background illumination is too low.
•
DIS doesn’t operate when object pattern is monotonic as like sky or white wall.
Notes
When the SPECIAL menu screen is displayed, press the Up and Down buttons
so that the arrow indicates ‘COMM ADJ’.
Set up the mode using the 4 direction buttons.
COMM ADJ (Communication Adjustment) :
This function sets up the camera communication status when controlling the
camera through an external control device.