Filter
Top Products
COLOR CCD CAMERACOLOR CCD CAMERA User’s ManualUser’s Manual
1514
The lens is not supplied with this camera. Purchase a lens suitable for your
environment. This camera accepts the auto iris lens and both C-and CS-mount lens.
1. Strip the insulation of the auto iris lens cable 8mm from the end.
2. Strip the insulation of the core of the auto iris lens cable to expose a 2mm length.
When Using Auto Iris Lens
Installation Procedures
Rear View
approx. 8mm
approx. 2mm
Function Setup Button
SET Button : Displays the menu on the screen. Press this button to confirm
status or after changing a selected item.
Up and Down Button : Used to move the cursor up or down in the menu
screen to select a desired menu item.
Left and Right Button : Used to move the cursor left or right in the menu
screen or to change the value of the selected item.
D & N Input Port
You can switch to Day & Night Mode by connecting an external signal to this port.
MD Output Port
Motion detection signals are output through this port.
RS-485 Control Port
You can control SETUP MENU through this port by using external controllers like a
Remote controller that RS-485 Communication is supported. For details, see page 21.
Video OUT Port
Video signals are output through this port. Connect this port to the Video IN port of a monitor.
Power LED
When power is properly connected, this LED comes on.
Power IN Port
Connect the power as specified for each model here.
Overview
Lens
• It is recommended to use the DC type Auto Iris Lens to effectively enjoy the major
functions of this camera.
• Keep the lens surface clean, since if it is contaminated with dirt or fingerprints the
picture quality suffers.
Notes
*High Voltage Type
(SHC-745PH)