Sony BVP-E30 series Camcorder User Manual


 
Location and Function of Parts
10
l Memory Stick slot
Insert a Memory Stick to store file data.
For details, see “Using a Memory Stick” on page 18.
m CA lock screw
Tighten the screw to secure the CA-570/570P/950/950P
Camera Adaptor or the WLL-CA55 Wireless Camera
Transmitter to the camera.
n Shoulder pad lock lever
Raise up the lever to move the shoulder pad forwards or
backwards. Do this to ensure the best balance when
shooting with the camera on your shoulder.
For details, see “Adjusting the Shoulder Pad Position” on
page 16.
o LOCK knob
Locks the viewfinder after adjusting the position in the
front-to-rear direction together with the viewfinder lock
lever.
p Viewfinder lock ring
Locks the viewfinder after adjusting the position side to
side.
q TEST OUT connector (BNC type)
Supplies the signal selected with the menu operation or the
remote control panel.
Front Panel
a VF (viewfinder) connector (20-pin)
Connect the 20-pin viewfinder cable of the BVF-10/10CE/
20W/20WCE Viewfinder.
b Cable clamp
Secures a microphone cable and lens cable.
c Lens mount lever
Secures the lens to the lens mount.
For details, see “Attaching a Lens to the Camera” on page
12.
d AUTO W/B BAL (automatic white balance/black
balance adjustment) switch
Adjusts the white balance and black balance automatically.
WHT: The white balance is automatically adjusted. When
the WHITE BAL switch on the side of the camera is
set to A or B, the adjusted value is stored in memory
cell A or B.
BLK: The black balance is automatically adjusted. The
black set is simultaneously adjusted.
The AUTO W/B BAL switch does not function when the
camera is connected to a CCU, RCP, or RM.
Do not turn off the power while automatic adjustment of
white balance or black balance is in progress. The setup
values of the camera may not be correctly stored.
Notes
VF
VTR START
AUTO W/B BAL
MIC
LEVEL
WHT
BLK
OFF
ON
SEL
SHUTTER
LENS
cLens mount lever
dAUTO W/B BAL switch
eMENU SELECT knob
aVF connector
bCable clamp
gSHUTTER switch
hVTR START button
jMIC connector
iLENS connector
fMIC LEVEL control