Filter
Top Products
23
Advanced Operations
123
Using alkaline batteries
Use the battery case (supplied) and six size AA (LR6) Sony Alkaline batteries (not
supplied).
(1) Remove the battery holder from the battery case.
(2) Insert six new alkaline batteries into the battery holder, following the marking
on the holder to be sure the batteries are installed in the correct direction.
(3) Insert the battery holder with the alkaline batteries.
(4) Insert the battery case with the alkaline batteries to the battery mounting
surface of the camcorder in the same way as the battery pack.
Using alternative power sources
Battery Life
Using alkaline batteries at 77°F (25°C).
Continuous recording time 165 min.
Typical recording time 95 min.
Notes
•You may not use the battery case in cold environment.
•The battery life may be shorter depending on the using environment.
•The above battery lives are estimates. The battery life may be shorter depending on
the storage condition of the battery before being purchased and temperature.
When the battery case is installed
Slightly raise the viewfinder when you use the camcorder.
To remove the battery case
The battery case is removed in the same way as the battery pack.
When you replace the batteries, be sure to remove the battery case from the camcorder
to prevent malfunction.
Using a car battery
Use Sony DC-V515A car battery charger (not supplied). Connect the car battery cord to
the cigarette lighter socket of a car (12 V or 24 V). Connect the car battery charger and to
the camcorder in the same way as you connect the AC power adaptor.
To remove the car battery charger
The car battery charger is removed in the same way as the AC power adaptor.
This mark indicates that this product is a genuine accessory for Sony
video products.
When purchasing Sony video products, Sony recommends that you
purchase accessories with this “GENUINE VIDEO ACCESSORIES”
mark.