Filter
Top Products
25
Advanced Operations
Selecting the mode setting of each item
Items for both CAMERA and VTR modes
COMMANDER <ON/OFF>
•Select ON when using the supplied Remote Commander for the camcorder.
•Select OFF when not using the Remote Commander.
REC MODE
∗
<SP/LP>
•Select SP when recording in SP (standard play) mode.
•Select LP when recording in LP (long play) mode.
BEEP
∗
<ON/OFF>
•Select ON so that beeps sound when you start/stop recording, etc.
•Select OFF when you do not want to hear the beep sound.
VF PW-SAVE
∗
<ON/OFF>
•Select ON so that the picture in the viewfinder appears only when you bring your face
close to the viewfinder.
•Select OFF when you want to display the picture in the viewfinder all the time.
Items for CAMERA mode only
WIND <ON/OFF>
•Select ON to reduce wind noise when recording in strong wind.
•Normally select OFF.
ORC TO SET
∗
<ORC ON>
Select this item and press the START/STOP button to automatically adjust the
recording condition to get the best possible recording. If you have already perform this
function, “ORC ON” is displayed.
TITLE COL
∗
<WHITE/YELLOW/VIOLET/RED/CYAN/GREEN/BLUE>
Select the color of the title.
TITLE POS
∗
<CENTER/BOTTOM>
•Select CENTER to center the title in the picture.
•Select BOTTOM to position the title at the bottom of the picture.
TITLE LANG
∗
<ENGLISH/FRANÇAIS/ESPAÑOL/PORTUGUÊS>
Select the language of the preset titles.
TITLE 1 SET
∗
TITLE 2 SET
∗
Select to store your own original titles.
D ZOOM
∗
<ON/OFF>
•Select ON to activate digital zooming.
•Select OFF not to use the digital zoom. The camera goes back to 15x zoom.
REC LAMP
∗
<ON/OFF>
•Select OFF when you do not want the camera recording/battery lamp at the front of
the unit to light up.
•Normally select ON.
Changing the mode settings