Filter
Top Products
15-GB
Viewing images on TVs other than high-
definition TV
Connect the A/V OUT jack of the Cyber-shot
Station and the audio/video input jacks of the
TV.
A/V connecting cable
Red
White
Yellow
Audio
Video
Turn off the TV before connecting the Cyber-
shot Station and TV with the Component
A/V Cable.
The signal format to be output from the A/V
OUT jack depends on the camera setting.
To view the 1080i format images, you need a
TV compatible with 1080i format.
The audio to be output from the Cyber-shot
Station via the A/V OUT jack is monaural.
The Cyber-shot Station is not compatible with
the S-VIDEO connecting cable.
2 Turn on the power by pressing the
(playback) button of the camera or the
POWER button on the Remote Commander.
Tips
The buttons on the camera or the Remote
Commander may not function immediately
after the camera is attached to the Cyber-
shot Station. This occurs when the camera is
booting up and is not a malfunction. Wait for
about 10 seconds.
3 Turn on the TV and set the input switch to
the input connected in step 1.
4 Press / on the Control buttons of the
Remote Commander to select the image.
You can also select the image by pressing /
on the Control buttons of the camera.
The Cyber-shot Station is compatible with both
NTSC and PAL TV systems. For further details,
see the operating instructions supplied with the
camera.
Notes
After attaching the camera to the Cyber-shot
Station, the CHARGE lamp may blink slowly for
3 to 10 seconds. This indicates communication
between the camera and the Cyber-shot Station,
and it is not a malfunction.
If CHARGE lamp does not light or blinks for
more than 10 seconds, refer to “Troubleshooting”.
Charging temperature
The temperature range for charging is 0 °C to
40 °C (32 °F to 104 °F). However, to provide
maximum battery efficiency, the recommended
temperature range when charging is 10 °C to
30 °C (50 °F to 86 °F).
On battery life
The battery life is limited. Battery capacity
decreases little by little as you use it more and
more, and as time passes. If the battery operating
time seems shortened considerably, a probable
cause is that the battery pack has reached the end
of its life. Buy a new battery pack.
The battery life varies according to how it
is stored and the operating conditions and
environment in which each battery pack is used.
Viewing images on a TV
screen
You can playback images by connecting the Cyber-
shot Station to the TV with the A/V connecting
cable (supplied) or the Component A/V Cable
(supplied).
Refer to the operating instructions supplied with
the TV for connection.
1 Viewing images on a high-definition TV
Connect the A/V OUT jack of the Cyber-shot
Station and the Component AV jacks of the TV.
Component A/V Cable
Red
White
Audio
Green
Blue
Red
Y
Pb/Cb
Pr/Cr