Filter
Top Products
242
Icon/item
OTHERS
DATA CODE
WORLD TIME
BEEP
COMMANDER
DISPLAY
REC LAMP
VIDEO EDIT
Mode
zDATE/CAM
DATE
—
zMELODY
NORMAL
OFF
zON
OFF
zLCD
V-OUT/LCD
zON
OFF
zRETURN*
TAPE*
MEMORY*
Meaning
To press DATA CODE on the Remote Commander to
display date, time and various settings during
playback (p. 52)
To press DATA CODE on the Remote Commander to
display date and time during playback
To set the clock to the local time. Turn the SEL/PUSH
EXEC dial to set a time difference. The clock changes
by the time difference you set here. If you set the time
difference to 0, the clock returns to the originally set
time.
To output the melody when you start/stop recording
or when an unusual condition occurs on your
camcorder
To output the beep instead of the melody
To cancel the melody and beep sound
To activate the Remote Commander supplied with
your camcorder
To deactivate the Remote Commander to avoid
erroneous remote control operation caused by other
VCR’s remote control
To show the display on the LCD screen and in the
viewfinder
To show the display on the TV screen, LCD screen
and in the viewfinder
To light up the camera recording lamp at the front of
your camcorder
To turn the camera recording lamp off so that the
person is not aware of the recording
To cancel video editing
To make programme and perform video editing
(p. 104)
To make programme and perform MPEG editing
(p. 175)
POWER
switch
PLAYER/VCR
MEMORY
CAMERA
MEMORY
PLAYER/VCR
CAMERA
MEMORY
PLAYER/VCR
CAMERA
MEMORY
PLAYER/VCR
CAMERA
MEMORY
CAMERA
MEMORY
PLAYER/VCR
Changing the menu settings
* Except DCR-TRV16E/TRV116E
Note
If you press DISPLAY with DISPLAY set to V-OUT/LCD in the menu settings, the picture from a TV
or VCR will not appear on the LCD screen even when your camcorder is connected to outputs on the
TV or VCR.
In more than five minutes after removing the power supply
The “PROGRAM AE”, “AUDIO MIX”, “COMMANDER”, “HiFi SOUND”, and “WHT BAL” settings
are returned to their factory settings.
Other menu settings are held in memory even when the battery is removed.
When recording a close subject
When REC LAMP is set to ON, the red camera recording lamp on the front of the camcorder may
reflect on the subject if it is close. In this case, we recommend that you set REC LAMP to OFF.