Filter
Top Products
257
Troubleshooting Поиск и устранение неисправностей
Others
Symptom Cause and/or Corrective Actions
• The cassette has no cassette memory.
c Use a cassette with cassette memory. (p. 130)
• The cassette memory is full.
c Erase unwanted title. (p. 133)
• The cassette is set to prevent accidental erasure.
c Slide the write-protect tab so that red portion is not visible.
(p. 34)
• The tape has a blank portion between recorded portions.
c Superimpose the title to a recorded portion. (p. 130)
• The cassette has no cassette memory.
c Use a cassette with cassette memory. (p. 137)
• The cassette memory is full.
c Erase unwanted titles. (p. 133)
• The cassette is set to prevent accidental erasure.
c Slide the write-protect tab so that red mark is not visible.
(p. 34)
• The input selector on the VCR is not set correctly.
c Check the connection and set the input selector on the VCR
again (p. 104)
• The camcorder is connected to DV equipment of other than
Sony using the i.LINK cable (DV connecting cable).
c Set it to IR (p. 111).
• Setting programme on a blank portion of the tape is attempted.
c Set the programme again on a recorded portion (p. 115).
• The camcorder and the VCR are not synchronised.
c Adjust the synchronization (p. 113).
• The IR SETUP code is incorrect.
c Set the correct code (p. 107).
• Setting programme on a blank portion of the tape is attempted.
c Set the programme again on a recorded portion (p. 175).
• COMMANDER is set to OFF in the menu settings.
c Set it to ON. (p. 242)
• Something is blocking the infrared rays.
c Remove the obstacle.
• The batteries are inserted in the battery holder with the + –
polarities incorrectly matching the + – marks.
c Insert the batteries correctly. (p. 299)
• The batteries are dead.
c Insert new ones. (p. 299)
• DISPLAY is set to V-OUT/LCD in the menu settings.
c Set it to LCD. (p. 242)
*
1)
Except DCR-TRV16E/TRV116E
*
2)
DCR-TRV25E/TRV27E/TRV116E/TRV118E only
(continued on the following page)
The title is not recorded.
The cassette label is not recorded.
Digital program editing to a tape
does not function.
Digital program editing to a
“Memory Stick” does not
function.*
1)
The Remote Commander supplied
with your camcorder does not work.
The picture from a TV or VCR does
not appear even when your
camcorder is connected to output on
the TV or VCR.*
2)
Types of trouble and how to correct trouble