Filter
Top Products
88
Remaining disc space indicator is
not displayed.
• Set [ REMAINING] to [ON] to always
display the remaining disc space indicator
(p. 65).
The indicators of the disc type and
the recording format on the LCD
screen are grayed out.
• The disc may have been created other than
your camcorder. You can play back with
your camcorder, but you cannot record
additional scenes.
You cannot operate functions using
the “Memory Stick Duo.”
• If you use a “Memory Stick Duo” formatted
on a computer, format it again on your
camcorder (p. 60).
You cannot delete or format the
“Memory Stick Duo.”
• The maximum number of images that you
can delete on the index screen at one time is
100.
• You cannot delete still images that have
write-protection set by another device.
Data file name is incorrect or
flashing
• The file may be corrupted.
• The file format may not be supported by
your camcorder. Use the supported file
format
(p. 101).
Refer also to “Discs/"Memory Stick Duo"”
(p. 87).
Pressing START/STOP does not
record movies on the disc.
• The playback screen is displayed. Set your
camcorder to recording standby (p. 35).
• Your camcorder is recording the scene you
have just shot on the disc.
• The disc has run out of space. Use a new disc
or format the disc (DVD-RW/DVD+RW
only, p. 59). Or delete the unnecessary
images (p. 48).
• When you are using one of the following
discs after finalizing it, make the disc to be
able to record additional scenes (p.60). Or
use a new disc.
– DVD-RW (VIDEO mode)
–DVD+RW
• The temperature of your camcorder is
extremely high. Turn off your camcorder
and leave it for a while in a cool place.
• Moisture condensation has occurred with the
disc. Turn off your camcorder and leave it
for about 1 hour in a cool place (p. 105).
You cannot record a still image.
• The playback screen is displayed. Set your
camcorder to recording standby (p. 35).
• The “Memory Stick Duo” has run out of
space. Use a new “Memory Stick Duo” or
format the “Memory Stick Duo” (p. 60). Or
delete the unnecessary images (p. 49).
• You cannot record a still image on a disc on
your camcorder.
The ACCESS lamp lights up even
when you stop recording.
• Your camcorder is recording the scene you
have just shot on the disc.
Recording
Troubleshooting (Continued)