Filter
Top Products
Getting started
Getting started
21
2 Insert a cassette with its window-side
facing up.
3 Press .
The cassette compartment automatically
slides back in.
4 Close the lid.
To eject the cassette
1
Slide the OPEN/EJECT lever in the
direction of the arrow and open the lid.
The cassette compartment automatically
comes out.
2 Take out the cassette, then press .
The cassette compartment automatically
slides back in.
3 Close the lid.
Inserting a “Memory Stick Duo”
For details on the “Memory Stick Duo” (such
as write-protection), see page 125.
b Note
• You can use only a “Memory Stick Duo,” which is
about half the size of a standard “Memory Stick,” in
your camcorder (p. 125). Do not try to force any
other type of “Memory Stick” into the “Memory
Stick Duo” slot.
Insert the “Memory Stick Duo” with the b
mark at the bottom left corner until it
clicks.
To eject a “Memory Stick Duo”
Lightly push the “Memory Stick Duo” in once.
Window-side
Push the center of the back
of the cassette lightly.
b mark
Access lamp
Lightly push in
once.
,continued