Filter
Top Products
Recording
40
Adjusting the focus
The focus is adjusted automatically in the
default setting.
Adjusting the focus for an off-
center subject – SPOT FOCUS
You can select and adjust the focal point to
aim it at a subject not located in the center of
the screen.
1 Touch during recording or in
the standby mode.
2 Touch [SPOT FOCUS].
If the item is not displayed on the screen,
touch / . If you cannot find it, touch
[MENU], and select it from the
(CAMERA SET) menu.
3 Touch the subject for which you want
to adjust the focus on the screen.
[SPOT FOCUS] flashes while the camera is
adjusting the focus.
9 appears.
4 Touch [END].
To adjust the focus automatically
Follow steps 1 and 2, then touch [AUTO] in step
3. Or press FOCUS after step 4.
b Note
• You cannot use the SPOT FOCUS function together
with [PROGRAM AE].
• Focusing distance information will not be displayed.
Adjusting the focus manually
You can adjust the focus manually according
to the recording conditions.
Use this function in the following cases.
– To record a subject behind a window covered
with raindrops.
– To record horizontal stripes.
– To record a subject with little contrast
between the subject and its background.
– When you want to focus on a subject in the
background.
– To record a stationary subject using a tripod.
1 Press FOCUS during recording or in
the standby mode.
9 appears.
0:00:00
ENDAUTO
SPOT FOCUS STBY
0:00:00
ENDAUTO
SPOT FOCUS STBY
FOCUS
Focus ring