Sony DCR-IP1 Camcorder User Manual


 
Playback
Playback
45
Playing the picture on
a TV
Connect your camcorder via the Handycam
Station or the AUDIO/VIDEO jack of your
camcorder to a TV using the supplied A/V
connecting cable.
Connect the supplied AC Adaptor to the wall
outlet for the power supply (p. 15).
Refer also to the instruction manuals supplied
with the devices to be connected.
To copy to another tape, see page 77.
*1The supplied A/V connecting cable has a video plug
and an S video plug for the video connection.
*2You can play back images clearly when using an S
video connection. When there is an S (S1) video
jack on the device to be connected, connect the S
video plug to that jack instead of using the yellow
video plug. This connection produces higher
quality MICROMV format pictures. The audio will
not be output when you connect with the S video
plug alone.
When your TV is connected to a VCR
Connect your camcorder to the LINE IN input
on the VCR using the A/V connecting cable. Set
the input selector on the VCR to LINE.
When your TV is monaural (When your
TV has only one audio input jack)
Connect the yellow plug of the A/V connecting
cable to the video input jack and connect the
white or the red plug to the audio input jack of
your TV or VCR.
AUDIO
VIDEO
S (S1)
VIDEO
IN
AUDIO/
VIDEO
Signal flow
AUDIO/VIDEO jack
A/V connecting cable (supplied) *1
TVs or VCRs
Yellow
White
Red
Used when you have an S (S1) video jack on
your TV or VCR. *2
S video plug
(Black)
To the audio/video
input jacks