Sony DCR-IP1 Camcorder User Manual


 
Quick Start Guide
8
Quick Start Guide
Recording movies on a tape
1 Attach the charged battery pack to the camcorder.
To charge the battery, see page 13.
2 Insert a cassette into the camcorder.
a Slide the BATT (battery release)
lever in the direction of the arrow as
shown in the illustration and remove
the battery terminal cover.
b Attach the battery pack with its
terminal side facing your camcorder
as shown in the illustration and press
down the battery pack until it clicks.
a Slide the
lever in the direction of
the arrow, then open
the cassette lid.
The cassette compartment
comes out automatically.
b Insert the cassette with
the window-side facing
the cassette lid, then
push the center of the
back of the cassette
lightly.
c Lightly push the
cassette compartment
in with the cassette lid.
Close the cassette lid after
the cassette compartment
slides back in by itself.
BATT (battery release) lever
OPEN/EJECT
lever
OPEN/EJECT
Window-side