Filter
Top Products
33
Recording/Playback
To record in mirror mode............ qs
Open the LCD screen qs 90 degrees to the
camcorder (1), then rotate it 180 degrees to
the lens side (2).
• A mirror-image of the subject appears on the LCD
screen, but the image will be normal when
recorded.
To use a tripod ....................... qg
Attach the tripod (optional: the length of the
screw must be less than 5.5 mm) to the tripod
receptacle qg using a tripod screw.
To attach the shoulder belt ......... 0
Attach the shoulder belt (optional) with your
camcorder to the hook for the shoulder belt.
To play back a series of
still images (Slide show)........... 5
Touch on the still image playback
screen (p.30).
The slide show begins from the selected
image.
Touch to stop the slide show. To restart,
touch again.
• You can touch to set continuous slide show
playback. The default setting is [ON] (continuous
playback).
• You cannot operate playback zoom during slide
show.
To use Playback zoom............ 16
You can magnify images from about 1.1 to 5
times the original size.
Magnification can be adjusted with the power
zoom lever 1 or the zoom buttons 6 on
the LCD frame.
1 Play back the image you want to magnify.
2 Magnify the image with T (Telephoto).
A frame appears on the LCD screen.
3 Touch the portion you want to display in
the center of the LCD screen.
4 Adjust the magnification with W (Wide
angle)/T (Telephoto).
To cancel, touch [END].
• You cannot change the zoom speed with the zoom
buttons 6 on the LCD frame.
Playback