Sony DPFHD1000B Digital Photo Frame User Manual


 
Table of
Contents
Let’s Use Enjoying More Troubleshooting Index
43
GB
System requirements
Windows
Recommended OS: Microsoft Windows 7 SP1/ Windows Vista SP2 /Windows XP SP3
Port: USB port
Macintosh
Recommended OS: Mac OS X (v. 10.4 or later)
Port: USB port
To disconnect from a computer
Unplug the USB cable or turn the photo frame off after disconnecting the photo frame from
your computer as follows:
1 Click on (Safely Remove Hardware) on the Task Tray.
2 Click on (Eject removable disk).
3 Disconnect the USB cable, according to the message.
Use a Mini-B TYPE USB cable. If you use a commercially available USB cable, use a USB
cable with a Mini-B TYPE plug (be sure to connect the Mini-B TYPE USB connector to the
photo frame) shorter than 3 meters.
If multiple USB devices are connected to a computer or if a hub is used, a problem may
occur.
You cannot operate the photo frame from another USB device being used simultaneously.
Do not disconnect the USB cable during data communication.
Operation may not be guaranteed with some computers, even if they satisfy the
recommended system requirements.
For USB connection, the photo frame has been demonstrated as operable when connected to
a computer. When other devices are connected to the photo frame, these devices may not
recognize the internal memory of the photo frame.
Do not connect a computer to the USB Mini-B connector of the photo frame simultaneously
when a USB memory device is connected to the USB A connector.
A USB hub or USB device with a built-in USB hub may not operate properly.