Filter
Top Products
22
GB
When (Brightness) is selected
Press g/G to adjust an image while
checking the level of brightness, for
example.
• Brightness: Press G to brighten the
picture or g to darken it.
• Tint: Press G to make the picture
greenish or g to make it reddish.
• Saturation: Press G to deepen the
colors or g to lighten the colors.
• Sharpness: Press G to sharpen the
outlines or g to soften them.
3 Press ENTER.
The adjustment is executed and you can
select other adjustment option.
4 Press g/G to select (Exit) and
then press ENTER.
The Adjust menu will be closed.
5 Press PRINT.
1 Press g/G to select (Print) and
then press ENTER. Or, press
PRINT.
The print window is displayed. The print
quantity is displayed.
2 Set the print quantity.
• To increase the print quantity one by
one, press f repeatedly.
• To reduce the print quantity one by one,
press F briefly repeatedly.
3 Press ENTER.
1 Press g/G to select (Reset) and
then press ENTER.
The confirmation window is displayed.
2 Press f/F to select “OK”, and press
ENTER.
The settings in the Edit menu and Red-eye
Correction are disabled, and the image is
reset to the state it was in before editing.
The Edit screen or Adjust screen is
displayed again. If you press CANCEL or
select “CANCEL” and press ENTER, the
previous window is displayed.
Slider
Printing an edited image
Undoing the operations