Filter
Top Products
51
Using the Setup screen
Camera For details on the operation 1 page 49
When you operate the camera, the function guide appears.
The flash strobes two or more times before
shooting to reduce the red-eye phenomenon when
using the flash.
• To avoid blurring of images, hold the camera firmly until the shutter is released. It usually takes a second
after you press the shutter button. Also be sure not to allow the subject to move during this period.
• Red-eye reduction may not produce the desired effects. It depends on individual differences and
conditions, such as distance to the subject, or if the subject looked away from the pre-strobe.
Displays the recorded image on the screen for approximately two seconds immediately after
shooting a still image.
• If you press the shutter button halfway down, the recorded image display disappears and you can
immediately shoot the next image.
Function Guide
On
Displays the function guide.
Off
Does not display the function guide.
Red Eye Reduction
On ( )
Reduces the red-eye phenomenon.
Off
Does not use Red Eye Reduction.
Auto Review
On
Uses the Auto Review.
Off
Does not use Auto Review.