Filter
Top Products
57
For details on the operation 1 page 49
Using the Setup screen
Setup2
2
The default settings are marked with .
Selects the USB mode to be used when connecting the camera to a computer or a PictBridge
compliant printer using the dedicated USB cable.
Sets the video signal output according to the TV color system of the connected video
equipment. The TV color systems differ depending on the country and region.
To view images on a TV screen, check the TV color system of the country or region of use
(page 60).
USB Connect
PictBridge
Connects the camera to a PictBridge compliant printer
(page 77).
PTP
When [PTP] (Picture Transfer Protocol) is set and the camera
is connected to a computer, the images in the recording folder
on the camera are copied to the computer (Compatible with
Windows XP and Mac OS X).
Mass Storage
Establishes a Mass Storage connection between the camera
and a computer or other USB device (page 66).
Video Out
NTSC
Sets the video output signal to NTSC mode (e.g., for the
USA, Japan).
PAL
Sets the video output signal to PAL mode (e.g., for Europe).