Filter
Top Products
94
Warning messages
Cannot record
• The camera cannot record images in the
selected folder. Select a different folder
(page 54).
File error
• An error occurred while the image was
playing back.
File protect
• Release the protection (page 43).
Image size over
• You are playing back an image of a size
that cannot be played back on your
camera.
Invalid operation
• You are trying to play back a file that is
not compatible with the camera.
(Vibration warning indicator)
• Camera shake may occur due to
insufficient light. Use the flash or mount
the camera on a tripod to secure the
camera.
Enable printer to connect
• [USB Connect] is set to [PictBridge],
however the camera is connected to a
non-PictBridge compliant device.
Check the device.
• The connection is not established.
Disconnect and connect the dedicated
USB cable again. If an error message is
indicated on the printer, refer to the
operating instructions supplied with the
printer.
Connect to PictBridge device
• You tried to print images before the
printer connection was established.
Connect to a PictBridge compliant
printer.
No printable image
• You tried to execute [DPOF image]
without placing a DPOF (Print order)
mark on the image(s).
• You tried to execute [All In This Folder]
while a folder that holds only movies
was selected. You cannot print movies.
Printer busy
Paper error
No Paper
Ink error
Low Ink
No Ink
• Check the printer.
Printer error
• Check the printer.
• Check if the image you want to print is
corrupted.
• The data transmission to the printer may
not be completed yet. Do not disconnect
the dedicated USB cable.
Processing
• The printer is canceling the current print
job. You cannot print until it is finished.
This may take time, depending on the
printer.