Filter
Top Products
13
Getting started
Viewing
*3)
still images
*3)
With the LCD screen on, viewing single
images in order, one approximately every
three seconds
Shooting
*4)
movies
*4)
Continuous shooting with an image size of
160×112
• The battery life and the number of images
recordable are decreased under the following
conditions:
– At low temperatures.
– Using the flash.
– Turning on and off frequently.
– Using the zoom frequently.
– When [POWER SAVE] is set to [OFF].
– When [LCD BACKLIGHT] is set to
[BRIGHT].
– Using the battery pack used repeatedly or
self-discharged after charging (page 97).
The POWER SAVE function
When the POWER SAVE function is
activated, you can shoot for a longer
period of time.
Set the mode dial to SET UP, and set
[POWER SAVE] in [SETUP 2] to [ON].
The factory setting is [ON] (page 94).
When the POWER SAVE
function is activated
• The LCD screen will be darker than it is when
[POWER SAVE] is set to [OFF]. You cannot
change the settings for [LCD BACKLIGHT]
at this time (page 94).
• When the power turns on, the Flash mode is
normally set to “ ” (No flash).
• If you want to shoot using the flash, press v
( ) on the control button, and select “ ”
(Forced flash) or Auto (page 26).
• When shooting sill images, the focus only
works while the shutter button is pressed
down halfway.
Image
size
NP-FC10 (supplied)
No. of
images
Battery
life (min.)
DSC-P9
2272×1704
640×480
Approx.
3200
Approx. 160
DSC-P7
2048×1536
640×480
Approx.
3200
Approx. 160
LCD
screen
NP-FC10 (supplied)
Battery life (min.)
DSC-P9
ON
Approx. 80
OFF
Approx. 110
DSC-P7
ON
Approx. 80
OFF
Approx. 110