Filter
Top Products
12
Getting started
Preparing batteries
Use the following batteries in this camera.
Acceptable batteries
Size AAA Nickel Metal Hydride batteries (2)
– NH-AAA-DI (2) (supplied)
– NH-AAA-2DI twin-pack (not supplied)
Batteries that cannot be used*
Manganese batteries, lithium batteries, Ni-Cd batteries,
alkaline batteries
∗ When the above batteries are used, operation is not
guaranteed due to possible voltage drops or other
characteristics of the batteries. In addition, the battery
remaining indicator is not displayed correctly.
Charging the batteries
, Insert Nickel Metal Hydride batteries into
the charger (supplied).
•
Be sure to charge the Nickel Metal Hydride batteries supplied
with your camera before using them for the first time.
• We recommend charging the batteries in an ambient
temperature of between 10°C to 30°C (50°F to 86°F). If the
batteries are charged in an environment where the temperature
is outside that range, the batteries may not charge efficiently.
• Connect the battery charger to an easily accessible wall outlet
(wall socket) close by.
• Note that the battery charger is not isolated from the power
source even if charging is completed and the CHARGE lamp
is off. If some trouble occurs while using the charger,
immediately shut off the power by disconnecting the plug out
of the wall outlet (wall socket).
1
BC-CS1
(supplied)
Insert with the correct polarity +/–