Filter
Top Products
70
“USB MODE: NORMAL ” appears on the LCD screen.
When a USB connection is established for the first
time, your computer automatically runs the used
program to recognize your camera. Wait for a while.
• If “USB MODE: NORMAL” is not shown in step 3,
confirm that [USB] is set to [NORMAL] in [ ] (page 92).
• In USB mode, the POWER button, lens cover and other
controls on the camera do not function.
Disconnecting the USB cable from your
computer or removing the “Memory
Stick” from your camera during USB
connection
For Windows 2000, Me, or XP users
1 Double-click on the tasktray at the lower right of
the screen.
2 Click (Sony DSC), then click [Stop].
3 Confirm the device on the confirmation screen, then
click [OK].
4 Click [OK].
This step is unnecessary for Windows XP users.
5 Disconnect the USB cable or remove the “Memory
Stick.”
For Windows 98 or 98SE users
Do only step 5 above.
3
USB MODE:NORMAL
When the access lamp is lit up, it means that image
data is being read or written. Never open the
battery/“Memory Stick” cover at this time, as the
data may be damaged.