Filter
Top Products
87
Menu Organization and Operation
Chapter 5 Menu Displays and Detailed Settings
AUDIO AU MODE FS32K/FS48K FS48K Page4 Sets the audio recording level. A P
AU HEADROOM NTSC: –12dB/
–20dB
PAL: –12dB/
–18dB
NTSC:
–20dB
PAL:
–18dB
– Sets the audio reference level.
AU FADE OFF/ON OFF Turns the audio fade-in and fade-out
functions on or off. (When set to ON,
recording is continued during an
audio fade-out.)
AU SG (1KHz) OFF/ON OFF Sets whether to output a 1 kHz test
tone during the Color Bar mode or
not.
F AUDIO VOL ENABL/DSABL ENABL Sets the validity of the AUDIO LEVEL
knob on the front of the camcorder
(page 11). (When setting to ENABL,
the level of CH-1 is set to the value of
AUDIO LEVEL knob on the front of
the camcorder multiplied by the
AUDIO LEVEL (CH-1/CH-2) control
on the side of the camcorder.)
VTR MODE REC TALLY BLINK OFF/ON ON – Turns the tally illumination control on
or off in the event of BATTERY
BEFORE END/TAPE BEFORE END.
A P
STBY OFF TIMER 1MIN/3MIN/
5MIN
1MIN Sets the time of standby-off interval (if
there is no operation for a preset
interval time while the recording is
stopped, the camcorder goes to
standby-off mode automatically).
REC FORMAT DVCAM/DV SP DVCAM Page4 Selects the type of video codec.
SETUP ADD OFF/ON ON – See “To use setup add (DSR-400/
450WS only)” on page 66.
PRESET
WHT
COLOR TEMP <P> Displays color
temperature
(Converted
form R/B
GAIN).
3200 Page1 Sets the color temperature of preset
white balance.
A P R St
COLOR FINE <P> (–99 to 99) 0 – Adjusts the value more precisely
when the color temperature
adjustment through COLOR TEMP
<P> is not satisfactory.
R GAIN <P> Sets R gain of preset white balance.
B GAIN <P> Sets B gain of preset white balance.
D5600K <P> OFF/ON OFF Selects whether to electrically apply
5600K filter to preset white balance.
A St
AWB ENABLE <P> Turns on and off the function which
automatically acquires the preset
white balance.
–
DCC ADJUST DCC FUNCTION
SEL
DCC/ADP.K/
FIX
DCC – Selects the function assigned to the
DCC switch. ADP.K stands for
Adaptive Knee and FIX stands for
fixed value.
A P Sc
DCC D RANGE 400% / 450% /
500% / 550% /
600%
600% Sets the dynamic range when the
DCC switch is set to the ON position.
A P
DCC POINT (–99 to 99) 0 Adjusts DCC minimum knee point.
DCC GAIN Adjusts gain to DCC detected value.
DCC DELAY TIME Adjusts DCC reaction speed.
Page Item Settings Default USER
menu
Description File