Filter
Top Products
115
Saving and Loading Scene Files
Chapter 6 Saving and Loading the User Setting Data
3
Press the MENU knob. Then turn the MENU knob
until x moves to the character position that you want
to select, then press the MENU knob.
4
Repeat step 3 for each of the remaining characters.
Set the file ID before saving the scene file in the
“Memory Stick” or the camcorder memory.
Otherwise, the file ID is not saved with the other data.
5
When the input is complete, turn the MENU knob to
move x over END, then press the MENU knob.
The file ID is set, and the SCENE FILE page appears
again.
Carry out the procedure from step 2 in “Saving a scene
file” on page 113. The set file ID is saved together
with the data.
To select the display contents
You can select the items of file information to be displayed
on the SCENE STORE pages (P01 to P20) or the SCENE
RECALL pages (P01 to P20) used for saving data to or
loading data from a “Memory Stick”.
For details to select the item, “To select the display
contents” on page 111.
Loading scene files
1
Display the SCENE FILE page of the FILE menu.
For details on menu operations, see “Basic menu
operations” on page 93.
2
To load the scene file stored in the camcorder, press
the MENU knob. Then turn the MENU knob to move
b to the desired file number, and press the MENU
knob again.
s on the left of the file number changes to x. The
camcorder is set up according to the loaded scene file.
To cancel the selected scene file
Turn the MENU knob to move b to x, and press the
MENU knob. x changes to s. The camcorder returns
to the settings before selecting this scene file.
To load a scene file saved in the “Memory
Stick”
1 Turn the MENU knob to move b to SCENE
RECALL, and press the MENU knob.
The SCENE RECALL page appears.
2 Turn the MENU knob until the page which
contains the desired file appears.
3 Press the MENU knob. Then turn the MENU knob
to move b to the desired file number, and press the
MENU knob again.
The message “RECALL OK? YES b NO”
appears.
3
To carry out the recall, turn the MENU knob to move
b to YES and press the MENU knob.
To cancel, press the MENU knob leaving b pointing to
NO.
When the loading is completed, the message
“COMPLETE” appears. The camcorder is set up
Note
Example: When entering the letter “+”
F04 SCENE FILE
!#$%&'()*+,-./012345678
9:;<=>?@ABCDEFGHIJKLMNOP
QRSTUVWXYZ[ ]abcdefghijk
lmnopqrstuvwxyz~
INS DEL RET ESC END
s
STANDARD
SCENE RECALL : EXEC
SCENE STORE : EXEC
F.ID :+TANDARD
TOP
04 SCENE FILE
s
1 :STANDARD
s
2 :STANDARD
s
3 :STANDARD
s
4 :STANDARD
s
5 :STANDARD
s
STANDARD
SCENE RECALL : EXEC
SCENE STORE : EXEC
F.ID: SCENE21
TOP
File ID
F04 SCENE FILE
s
1 :SCENE 25
x
2 :SCENE 26
s
3 :SCENE 27
s
4 :SCENE 28
s
5 :NO FILE
s
STANDARD
SCENE RECALL : EXEC
SCENE STORE : EXEC
F.ID :SCENE21
TOP
?P00 SCENE RECALL
DISPLAY MODE : F.ID
MEM-1:STANDARD
MEM-2:STANDARD
MEM-3:STANDARD
MEM-4:STANDARD
MEM-5:NO FILE
ESC
P01 SCENE RECALL
RECALL OK? YES NO
DISPLAY MODE : ALL
001.SCENE1
002.SCENE2
003.NO FILE
004.SCENE4
005.SCENE5
***.5FILE LOAD MEM1-5
ESC