Filter
Top Products
100
Copying still images from a mini DVCAM
tape – photo save
Using the search function, you can automatically take in only the still images from mini
DVCAM tapes and record them on a “Memory Stick” or a PC card in sequence.
Before operation
•Insert a recorded mini DVCAM tape and rewind the tape.
•Insert the PC card adaptor (with a “Memory Stick” inside) or a PC card to the unit.
(1) Set the POWER switch to VTR.
(2) Press MENU to display the menu.
(3) Turn the control dial to select
, then press the dial.
(4) Turn the control dial to select PHOTO SAVE, then press the dial. “PHOTO
BUTTON” appears on the LCD screen or in the viewfinder.
(5) Press PHOTO deeper. The still image from the mini DVCAM tape is recorded on a
“Memory Stick” or PC card. The number of still images copied is displayed. “END”
is displayed when copying is completed.
To cancel copying
Press MENU to stop copying.
When the memory of the “Memory Stick” or PC card is full
“MEMORY FULL” appears on the screen, and the copying stops. Insert another “Memory
Stick” or PC card and repeat the procedure from step 1.
1
2
POWER
OFF
CAMERA
MEMORY
VTR
MENU
5
PHOTO
PHOTO SAVE 0:00:00:00
4/15
SFN
[MENU]:END
SAVING
PHOTO SAVE 0:00:00:00
8/15
SFN
[MENU]:END
END
40
MEMORY SET
QUALITY
PROTECT
PHOTO SAVE READY
RETURN
[MENU]:END
3
4
MEMORY SET
QUALITY
PROTECT
PHOTO SAVE
[MENU]:END
PHOTO SAVE 0:00:00:00
4/15
SFN
[PHOTO]:STRAT [MENU]:END
PHOTO
BUTTON