Filter
Top Products
77
Advanced operations
Searching the boundaries of recorded tape with
title – title search
You can search for the boundaries of recorded tape with title – Title Search function. If you
use a tape with cassette memory, you can select the title displayed on the LCD screen.
You can only operate with the Remote Commander.
Searching for the title by using cassette memory
You can use this function only when playing back a tape with cassette memory (p. 118).
(1) Set the POWER switch to VTR.
(2) Press MENU to display the menu.
(3) Turn the control dial to select CM SEARCH in
, then press the dial.
(4) Turn the control dial to select ON, then press the dial.
(5) Press SEARCH MODE on the Remote Commander repeatedly, until the title search
indicator appears.
(6) Press = or + to select the title for playback.
Playback starts from the scene of the selected title automatically.
To stop searching
Press p.
Notes
•You cannot superimpose or search a title, if you use a cassette tape without cassette
memory.
•The camcorder may not search, if a tape has a blank portion in the between of the recorded
portions.
TITLE SEARCH
3 SCENE3
4 SCENE4
5 SCENE5
6 SCENE6
7 SCENE7
8 SCENE8
CM SET
CM SEARCH ON
TITLEERASE OFF
TITLE DSPL
TAPE TITLE
ERASE ALL
RETURN
[MENU]:END
1
2
5
3,4
6
SEARCH
MODE
POWER
OFF
CAMERA
MEMORY
VTR
MENU
TITLE SEARCH
1 SCENE1
2 SCENE2
3 SCENE3
4 SCENE4
5 SCENE5
6 SCENE6