Filter
Top Products
93
Memory card slot operations
Using the memory card slot – introduction
When the PC card adaptor or PC card does not come out
Remove the battery before ejecting the PC card adaptor/PC card.
Connecting the PC card/parallel port adaptor (not supplied) with
your computer
To display images recorded on the “Memory Stick” or PC card on the computer monitor,
connect the PC card/parallel port adaptor with your computer.
Turn off your computer, and then connect the PC card/parallel port adaptor (not supplied)
with your computer as illustrated below.
Install the MSAC-PR1 device driver into your computer from CD-ROM supplied with the
MSAC-PR1. For details, refer to “READ ME” on the CD-ROM.
To eject the PC card/PC card adaptor
Press the eject button.
Notes on the connection
•Select the one from the two DIN connectors that matches the keyboard connector of the
computer, and use this connector to connect the computer.
•When connecting the PC card/parallel port adaptor (not supplied) and the keyboard, make
sure sizes of the DIN connector of the keyboard and power cord match, then use the
adaptor connector to connect.
•For notebook computers, there is no need to connect the keyboard.
Note on the power/access lamp
Do not insert/remove the PC card adaptor or “Memory Stick” when the power/access lamp
is flashing; otherwise data on the “Memory Stick” or PC card may become damaged.
Printer cable
Keyboard
to keyboard
connector
DC jack
Power/access lamp
to D-sub
25-pin
connector
Computer
Adaptor connector