Filter
Top Products
92
Inserting a “Memory Stick” into PC card adaptor
Insert a “Memory Stick” with its connector side facing down.
Before inserting, check that the write protect switch is not set to LOCK position for recording
a still picture.
To eject the “Memory Stick”
Press the eject button.
Inserting the PC card adaptor or PC card
With the upper side of the connector facing the LCD panel, insert the PC card adaptor or PC
card until it clicks.
To eject the PC card adaptor or PC card
Slide the MEMORY RELEASE lever in the direction of the arrow as illustrated below.
When the access lamp is flashing
Never shake or strike the unit. Do not turn the power off , eject a PC card adaptor/PC card
or remove the battery pack. Otherwise, the image data breakdown may occur.
Using the memory card slot – introduction
Access lamp
MEMORY RELEASE
Eject button
“Memory Stick”
PC card adaptor