Filter
Top Products
125
Troubleshooting
Not connected to PictBridge
compatible printer.
• Switch off the printer and switch it on
again, then disconnect the USB cable
(supplied) and reconnect it.
Error. Cancel the task.
• Check the printer.
Cannot print. Check the printer.
• Switch off the printer and switch it on
again, then disconnect the USB cable
(supplied) and reconnect it.
x Flash
Charging... Cannot record still
images.
• You are trying to record a still image
while the flash is charging.
Flash cannot charge. Not available.
• A malfunction has occurred with the
strobe and disable charging.
Lens accessory attached. Cannot use
flash.
x Lens cover
Lens cover not fully open. Turn power
off then on. (p.22)
Lens cover is not closed. Turn the
power off once. (p.22)
x Easy Handycam
Cannot start Easy Handycam. (p.31)
Cannot cancel Easy Handycam. (p.31)
Invalid during Easy Handycam
operation. (p.31)
No recording in Easy Handycam
operation. (p.31)
• The DVD+RW has been finalized. Make
a disc to be able to record additional
scenes (p.59).
x Other
E Please connect AC adaptor.
• You are trying to finalize or format a disc,
or making a disc available for additional
recording after finalizing with the battery
capacity low. Use the AC Adaptor as the
power source to prevent the battery from
wearing out in the middle of those
operations.
Use new AC adapter or reinsert. (p.19)
Playlist full.
• You cannot create the playlist exceeding
999 scenes.
• There is not enough available space on
the disc or “Memory Stick Duo.”
Cannot divide.
• You cannot divide still images converted
to a movie with .
• You cannot divided a movie that is
extremely short.
Data protected.
• The disc has been protected with another
device.
Copy inhibit.
• You cannot copy scenes with the copy
protection signal.