Filter
Top Products
13
EN
Recalling the memorized setting
Press either of the POSITION buttons 1 – 6.
Canceling the preset memory
While holding down the RESET button, press the
POSITION button on which the settings are to be
canceled.
Notes
• Before presetting, be sure to reset the pan/tilt position.
Otherwise the correct position will not be memorized.
• The memorized information is retained until the power
of the main unit is turned off. To retain the memory even
if the power is turned off, set the BACKUP switch, at the
rear of the camera head, to ON. (See “About backup” on
page 25.)
MENU
PRESET
RESET
POSITION
PAN-TILT/CURSOR
STD REV
123
456
Press the
POSITION
button on
which the
settings are
to be canceled.
While
holding
down