Filter
Top Products
16
Step 2: Charging the battery pack
You can charge the “InfoLITHIUM”
battery pack (H series) (p. 101) after
attaching it to your camcorder.
b Notes
• You cannot attach any “InfoLITHIUM” battery
pack other than the H series to your camcorder.
1 Connect the AC Adaptor to the
DC IN jack on the Handycam
Station.
Be sure that the v mark on the DC plug
is facing up.
2 Connect the power cord to the AC
Adaptor and the wall outlet.
3 Slide the POWER switch in the
direction of the arrow to OFF
(CHG) (the default setting).
4 Attach the battery pack by sliding
it in the direction of the arrow
until it clicks.
5 Insert the camcorder into the
Handycam Station securely, all
the way to the bottom.
The /CHG (charge) lamp lights up and
charging starts. When the /CHG
(charge) lamp turns off, the battery is
fully charged.
b Notes
• When inserting the camcorder into the
Handycam Station, close the DC IN jack cover.
4
3
1
2
5
5
POWER
switch
DC IN jack
DC plug
AC Adaptor
Power cord
To the wall outlet
/CHG
(charge) lamp
Battery pack