Filter
Top Products
71
Customizing your camcorder
DATE/TIME
ADate
BTime
CAMERA DATA
CSteadyShot off
DBrightness
EWhite balance
FGain
GShutter speed
HAperture value
IExposure
z Tips
• appears for an image recorded using a flash.
• The data code is displayed on the TV screen if
you connect your camcorder to a TV.
• The indicator toggles through the following
sequences as you press DATA CODE on the
Remote Commander: [DATE/TIME] t
[CAMERA DATA] t [OFF] (no indication).
• Depending on the hard disk condition, bars [--:--
:--] appear.
You can select the number of thumbnails
that appear on the VISUAL INDEX screen.
BZOOM LINK
Change the number of thumbnails (6 or 12)
with the power zoom lever on your
camcorder.*
6IMAGES
Displays thumbnails of 6 images.
12IMAGES
Displays thumbnails of 12 images.
You can select the duration each of
thumbnail from 3, 6, 12 seconds, 1 or 5
minutes. The default setting is [3 sec.].
Movie
Still image
DISPLAY
* You can also operate with the zoom
buttons on the LCD frame or on the
Remote Commander.
INTERVAL SET